Cabrita is loved by all rental centers for his
towability by all cars and utility vehicles equipped
with a 2’’ ball trailer hitch at a top speed of 80
kmh.
The mini excavator is equipped of a standard wiring
signal lights. On transport, a security locking
system prevents all dangerous motions due to the
breakage of any parts of the swing and the boom
system.
The tow bar is equipped with a sliding leg support
to couple and uncouple the hitch easier to the
towing vehicle. The reversible tow bar can be used
with an 8 inches or 15 inches according with the
trailer hitch ball height from the ground.
The mini towable excavator Cabrita is the only one
of his range to have a 360 degrees continuous
rotation. The operator can choose the best direction
works, forward, backward or sideways without leaving
his seat.
Forward, backward, and sideturns movements are done
when lifting the shoe legs with the bucket, moving
the booms to have the appropriate action. For
maximum performance the works are executed on
wheelside or wheel and shoe leg side. This is to
permit to the shoes to be anchored on the ground.
The 360 degrees continuous rotation make of the
Cabrita your first choice equipment.
SLIDESHOW
Powerful
and accurate
The mini excavator ‘’ cabrita md ‘’ can dig a
trench or a hole of 75 inches deep. It can lift up a
385 pounds load in the bucket with full extended
booms. Loading can be done over a 60 inches topside
trailer from the ground level. On work position the
mini excavator keeps all his incredible self
performance during his 360 degrees continuous
rotation.
Technical
information
Model
CABR-07
Type
Open
cab
Weight of the excavator
Kg
(pounds )
454
( 1000 )
Bucket ( standard )
M3
( pi3
)
Mm (
in.)
0.03
( 1.2 )
35.5
( 14 )
Engine
Type
1
cylinder, 4 stroke, overhead valves, air
cooled.
Model
GX
240
Displacement cc ( in3
)
11.9
( 7.3 )
Horse power
Honda 3.9 h.p. @ 3600 rpm
Operation speed
2500
rpm
Fuel
consumption
0.51
lb/hbh
Performance
Swing speed
3.5
rpm @ 2500
Swing angle
360
degrés continuous
Depth of digging
75
in.
Height of loading
60
in.
Lifting capacity ( all booms extended )
255 kg ( 562 pounds. )
Minimum width
28
in.
Width closed
58
in.
Working width
69
in.
Height for transport
70
in.
Minimum height
43
in.
Lenght for transport
94
in.
Total lenght ( all booms extended )
164
in.
Swing radius ( all booms extended )
Digging force at the bucket
123
in.
3319 pounds
Operating pressure
2250
psi.
Fuel tank capacity
2.5
li. ( 0.95 US gal. )
Options
Bucket 10’’ & 24''
''V'' bucket
Ripper
blade
Call us for details
Fixed thumb
Call us for details
Hydraulic thumb
Call us for details
Note: Specifications are subject to change
without notice.
